Repair Kits

EP-2000 Epoxy Patch Kit

EP-2000 is a standard epoxy patch kit with exceptional compressive, impact, tensile strength, and flexual strength.  It can be used for spalded, abraded or corroded concrete.  One kit will cover 25 square feet at a 1/4 inch thick.  It can be easily installed by plant personnel.

 

Polycrete Polyurethane Patch Kit

Polycrete is a polyurethane concrete patch kit that is a trowel-installation designed for spalded, abraded or corroded concrete.  This option is environmentally friendly, non-corrosive, has zero VOC, and is rapid set (can be put back into service in one hour after installation at 70 degrees fahrenheit).  One kit will cover 25 square feet at a 1/4 inch thick.

EP-100W Water Epoxy Patch Kit

EP-100W Water Epoxy can be easily installed by company personnel on floors that have standing water or are unable to be dried.  Once installed, floors can be put back to use in four hours.  EP-100W has excellent impact, flexual strength and adhesion to wet concrete, good chemical resistance, and moderate heat distortion.  One kit will cover 25 square feet at a 1/4 inch thick.

 

 

Mix Resin and Hardener
Add Sand and Mix
Dump Onto Concrete
Trowel 1/8 Inch Thick
Trowel 1/8 Inch Thick
Broadcast Sand
Broadcast Sand
Roll on Sealer (Optional)

Slurry System

Mortar System Slideshow

Coming Soon!