UC-100 Urethane Concrete
(Microbicide can be added upon request)

UC-100S is a polyurethane concrete formulated for both commercial and industrial uses. UC-100S (slurry) is designed for conditions requiring rapid installation, while UC-100M (mortar) is a trowel system designed for filling corroded areas and holes.
Both systems provide protection of the concrete from thermal shock, impact, corrosion, chemical attack and abrasion. UC-100S is textured with a broadcasted sand to achieve non-skid properties. Systems are non-toxic, non-hazardous, and highly chemical resistant. UC-100S has a similar modulus of elasticity to that of concrete which all but eliminates differential flexing that is prevalent with other resins.
-
Quick Curing Formula
-
Thermal Shock Resistant
-
No VOC
-
High Chemical Resistance
-
Slip Resistance
-
Excellent Adhesion To Concrete
-
Non-Corrosive, Non-Toxic
-
Moisture Vapor Tolerant (Therefore eliminating
-
the need for 28-day wait time for the concrete to cure.)
-
Potato Processors
-
Chemical Processors
-
Road Repair
-
Bridge Deck Repair
-
Dairies
-
Bakeries
-
Vegetable Processors
2010 - present
2010 - present
Product Info
UC-100S is a self-leveling polyurethane concrete mortar slurry that is installed approximately 3/16 inch thick. UC-100S urethane mortars combine cement with water-based urethane technology to produce a mortar product exhibiting properties of both. It is specially formulated for repairing spalded and corroded concrete. Foot traffic can resume in approximately 4-5 hours following installation, and full service can be attained within 7-8 hours following installation.
Color Options
-
Gray
-
Red
-
Blue
-
Green
Technical Info
PDF Data Sheet